NETGEAR ProSafe GS108 User Manual page 44
Gigabit smart switch
Hide thumbs
Also See for ProSafe GS108:
- User manual ,
- Installation manual (9 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
GS108T Smart Switch Software Administration Manual
•
Chassis ID SubType: Indicates the basis for the Chassis ID entity.
•
Chassis ID: Identifier for the particular chassis in the System.
•
System Name: Administratively assigned system name.
•
System Description: Textual description of the network entity, including the full name and
version identification of the system's hardware type.
•
System Capabilities: Identifies the primary functions of the system.
•
Enabled Capabilities: Identifies which of the primary functions are enabled.
•
MED Device Type: Indicates whether the device is a MED device.
•
Management Address: The address associated with the LLDP agent that may be used to
reach higher layer entities to assist discovery by network management.
Table 3-2. Management Address
Item
Address Sub
Type
Interface Sub
Type
Interface Number Identifies specific address associated with the management address.
OID
•
Port: Local port number.
•
Port ID SubType: The basis for the identifier that is listed in the Port ID field.
•
Port ID: Identifier for the port from which LLDPDU was transmitted.
•
Port Description: Indicates the port's description.
The following LLDP local port information is displayed:
•
Port ID SubType: The basis for the identifier that is listed in the Port ID field.
•
Port ID: Identifier for the port from which LLDPDU was transmitted.
•
PVID: Port VLAN ID.
3-20
Description
Indicates type of address that is listed in the management address field.
Numbering method used for defining the interface number.
Type of hardware component or protocol entity associated with the given
management address.
v1.0, May 2007
Managing System Settings
Hide quick links:
Advertisement
Table of Contents
