NETGEAR ProSafe GS108 User Manual page 45

Table 3-3. 802.3 Set Details
Item
Auto Negotiation
Aggregator Status
Aggregator ID
Maximum Frame
Size
Table 3-4. MED Set Details
Item Description
Capabilities LLDP-MED Capabilities are specific to LLDP-MED Devices, advertisement of this TLV by
Endpoints enables LLDP-MED capable Network Connectivity Devices to definitively
determine support of LLDP-MED by Endpoints they are connecting to.
Device Type A specific type of LLDP-MED Device, which may be either a Network Connectivity
Device or a specific Class of Endpoint Device.
Location Indicates the specific Location ID data format being delivered in the Location ID field.
Format
Location ID Three Location ID data formats are defined.
• Coordinate-based LCI data format
• Civic Address LCI data format
• ECS ELIN data format
Power Type The Power Type field represents, whether LLDP-MED device transmitting the LLDPDU
is a Power Sourcing Entity (PSE) or Power Device (PD).
Power The Power Source field represents the power source being utilized by a PSE or PD
Source device.
Power The Power Priority represents the priority of the PD type device to the power being
Priority supplied by the PSE type device, or the power priority associated with the PSE type
device's port that is sourcing the power via MDI.
Managing System Settings
GS108T Smart Switch Software Administration Manual
Description
If auto-negotiation supported and enabled in both the systems, there should be
no speed difference.
Ports through which LLDPDU is transmitted is aggregated or not.
Port ID information for the aggregated port.
Maximum size of a frame that can be transmitted.
v1.0, May 2007
3-21