Memory Logs - NETGEAR ProSafe GS108 User Manual

GS108T Smart Switch Software Administration Manual
1. Click Logs Configuration in the blue navigation panel. A screen similar to that shown below
appears.
.
Figure 3-19
2. Click Enable Logging to enable logging.
3. Click the desired severity levels for the RAM and flash logs. See
configure the server logs.
4. Click Apply to update the logs configuration.

Memory Logs

1. Click Memory Logs in the blue navigation panel. A screen similar to that shown below
appears.
3-26
v1.0, May 2007
"Server Logs" for how to
Managing System Settings