GS108T Smart Switch Software Administration Manual
.
2. View the LACP settings:
•
LACP System Setting: Set LACP System Priority.
•
Interface Priority: LACP Port priority ranges from 0 - 65536.
•
Interface Timeout: Supports two modes of Timeout, Long/Short.
Monitor
The Monitor page allows you to configure any port's incoming and outgoing traffic to be mirrored
to a predefined sniffer port.
1. Click Monitor in the blue navigation panel. A screen similar to that shown below appears.
4-20
v1.0, May 2007
Configuring the Switch