.
Figure 4-41
2. Sniffer Mode: Select the sniffer mode:
•
Disable: disable port mirroring globally.
•
Ingress: mirroring only the ingress traffic to the designated source ports.
•
Egress: mirroring only the egress traffic to the designated source ports.
•
Both: mirroring both incoming and outgoing traffic on the designated source ports.
3. Sniffer Port: Select from 1 to 8 ports.
4. Source Ports: Select any number of ports to be monitored (mirrored). The ports can not be the
sniffer port.
5. Click Apply to update the monitor settings.
Configuring the Switch
GS108T Smart Switch Software Administration Manual
v1.0, May 2007
4-21