GS108T Smart Switch Software Administration Manual
•
Resending EAP: Defines the amount of time (in seconds) that lapses before EAP requests
are resent. The field default is 30 seconds.
•
Max EAP Requests: Displays the total amount of EAP requests sent. If a response is not
received after the defined period, the authentication process is restarted. The field default
is 2 retries.
•
Supplicant Timeout: Displays the amount of time (in seconds) that lapses before EAP
requests are resent to the supplicant. The field default is 30 seconds.
•
Server Timeout: Displays the amount of time (in seconds) that lapses before the device
re-sends a request to the authentication server. The field default is 30 seconds.
•
Termination Cause: Indicates the reason for which the port authentication was
terminated, please reference to help age of real device FW V1.0.1_03.
3. Click Apply.
EAP Statistics
The EAP Statistics page contains information about EAP packets received on a specific port.
1. Click EAP Statistics in the blue navigation panel. A screen similar to that shown below
appears.
4-36
v1.0, May 2007
Configuring the Switch