GS108T Smart Switch Software Administration Manual
Advanced
Click Advanced in the middle part of the blue navigation panel to expand the item to Jumbo
Frame, Rate Limiting, Storm Control, Spanning Tree, and SNMP.
Jumbo Frame
The Jumbo Frame page allows you to enable or disable the Jumbo Frame support. The default
frame size is 1518 bytes. When jumbo frame support is enabled the frame size may vary from
1,518 to 9,728 bytes.
1. Click Jumbo Frame in the blue navigation panel. A screen similar to that shown below
appears.
.
Figure 4-42
2. Click Disable or Enable.
3. Click Apply.
Rate Limiting
Rate Control determines the bandwidth of ingress and egress traffic for a specific port.
4-22
v1.0, May 2007
Configuring the Switch