GS108T Smart Switch Software Administration Manual
.
Figure 3-23
b. Input the required information in the provided fields:
•
Server IP: Input a valid IP Address for the remote server.
•
UDP Port: Input the UDP port number to connect with the server.
•
Facility: Input the type of facility. Select any one from the given eight facility types.
•
Description: Give the description of server log (limit is 256 characters).
•
Minimum Severity: Select the desired log level from the given eight log levels (e.g.,
Emergency, Alert, Critical, Error, Warning, Notice, Informational, or Debug).
c. Click Apply to add the server log.
Removing a server log from the Server Logs list
a. Check the server logs on the Server Logs page that need to be removed.
b. Click Apply to remove the server logs.
3-30
v1.0, May 2007
Managing System Settings