Reset - NETGEAR ProSafe GS108 User Manual

2. Click Factory Reset to reset the system.
• If there is no DHCP server on the network, the IP address will become 192.168.0.239.
• The password will return to the factory default password.

Reset

Reset enables you restart the switch with its current configuration.
Note: You can also use the Reset button on the front panel to reset the switch to its current
configuration.
To reset and restart the switch:
1. Click Reset in the blue navigation panel. A screen similar to that shown below appears.
.
Figure 5-62
2. Click Reset to restart the switch.
Managing Firmware and Reset Options
GS108T Smart Switch Software Administration Manual
v1.0, May 2007
5-5