.
Figure 4-57
All Source MACs are trusted when Trusted MAC list is empty.
•
When VLAN setting is in 802.1Q mode (see
parameters will be {PORT, VLAN ID, SRC MAC}.
•
When VLAN setting is in Port-based mode (see
parameters will be {PORT, SRC MAC}.
You can add or delete a MAC address:
To add a MAC address:
1. Click Add on the Trusted MAC page. A screen similar to that shown below appears.
Configuring the Switch
GS108T Smart Switch Software Administration Manual
"IEEE 802.1Q VLAN" on page
"Port-Based VLAN" on page
v1.0, May 2007
4-9), the filter
4-13), the filter
4-41