NETGEAR ProSafe GS108 User Manual page 60
Gigabit smart switch
Hide thumbs
Also See for ProSafe GS108:
- User manual ,
- Installation manual (9 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
GS108T Smart Switch Software Administration Manual
•
UnkonwnProtos: indicates received packets using unknown protocols.
Summary statistics
•
DropEvents: indicates packets which are dropped due to GBP or backpressure discard.
•
MulticastPkts: indicates transmitted/received multicast packets.
•
BrodcastPkts: indicates transmitted/received broadcast packets.
•
UndersizePkts: indicates received packets with length less than minimum packet size.
•
OversizePkts: indicates received packets with length more than maximum packet size.
•
Fragments indicates received packets (length 10 ~ 63 bytes) with invalid FCS or
alignment error.
•
Jabbers: indicates received packets (invalid FCS or code error) which exceed counter
maximum size to maximum receive frame length.
•
Collisions: indicates total transmitted collision packets.
•
CRCAlignErr: indicates received packets (invalid FCS) which lengths are between 64
bytes to counter maximum size.
•
TotalOctets: indicates total received (excluding framing bits, but including FCS bytes)
and transmitted (including fragments of frames that were involved with collisions, but
excluding preamble/SFD or jam bytes) byte.
•
TotalPkts: indicates total received and transmitted packet count (including bad packets,
all unicast, broadcast, multicast and MAC control packets).
•
64 BytePkts: indicates transmitted packets with packet length less than or equal to 64
bytes.
•
65-127 BytePkts: indicates transmitted packets with packet length between (include) 65 ~
127 bytes.
•
128-255 BytePkts: indicates transmitted packets with packet length between (include)
125 ~ 255 bytes.
•
256-511 BytePkts: indicates transmitted packets with packet length between (include) 256
~ 511 bytes.
•
512-1023 BytePkts: indicates transmitted packets with packet length between (include)
512 ~ 1023 bytes.
•
1024-1518 BytePkts: indicates transmitted packets with packet length between (include)
1024 ~ 1518 bytes.
4. Click Refresh to update the port statistics.
4-6
v1.0, May 2007
Configuring the Switch
Hide quick links:
Advertisement
Table of Contents
