NETGEAR ProSafe GS108 User Manual page 41

Port Configuration
A screen similar to that shown below is located near the bottom of the LLDP Configuration Switch
Settings screen.
.
Figure 3-15
The following information about LLDP configuration for a port is displayed:
• Admin Status: The administratively desired status of the local LLDP agent.
• Notification Enable: Indicates whether or not notifications from the agent are enabled.
• MED Notification Enable: Indicates whether or not MED notifications from the agent are
enabled.
• Optional TLVs Tx Enabled: Indicates which TLVs are enabled for transmission.
Table 3-1. Legends for Optional Enabled TLVs
Category Legend
Basic P
N
D
C
802.1 P
802.3 M
L
F
Managing System Settings
GS108T Smart Switch Software Administration Manual
Meaning
Port Description
System Name
System Description
System Capabilities
Port Vlan ID
MAC/PHY Configuration/Status
Link aggregation
Frame size
v1.0, May 2007
3-17