Centralized Control Group No. Setting - Daikin VRV-WIII RWEYQ72PTJU Service Manual

SiUS30-1301
1.4

Centralized Control Group No. Setting

1.4.1 BRC1E71/72
In order to conduct the centralized remote control using the central remote controller and the unified
ON/OFF controller, Group No. settings should be made by group using the operating remote
controller.
Make Group No. settings for centralized remote control using the operating remote controller.
<Group Address (Unit)>
Basic screen
is displayed.
Press Press and hold
Cancel Cancel button
button for 4 seconds
once. or more.
Service
settings menu
is displayed.
Service settings menu
Group Address
 For setting group No. of Heat reclaim ventilator and wiring adaptor for other air conditioners,
Note:
NOTICE
Enter the group No. and installation place of the indoor unit into the attached installation table. Be
sure to keep the installation table with the operation manual for maintenance.
Remote Controller
Select "Group Address"
and then press Menu/OK
button.
Press Cancel
button once.
Press Cancel
button once.
Select the
desired Group
Address using
the /
(Up/Down)
buttons, and then
press Menu/OK
button.
Press Cancel
button once.
Item 2
Group Address (Group)
Group Address (Unit)
etc., refer to the instruction manual attached.
Item 2 is
displayed.
Select "Group
Address (Unit)"
and then press
Menu/OK button.
Item 2 is
displayed.
Select Group
Address using
the / buttons,
and then press
Menu/OK button.
Item 2 is
displayed.
 Description
This menu is used to make group address setting for centralized
control.
It is also used to make group address setting by indoor unit.
Wired Remote Controller
31