Daikin VRV-WIII RWEYQ72PTJU Service Manual page 45

SiUS30-1301
2.3. Indoor Unit Status
2.3. Indoor Unit Status
2.4. Condensing Unit
2.5. Error Display
2.6. Swap Unit No.
2.7. Addressed Sensor
Remote Controller
Maintenance Menu
1. Unit No.
2. FAN
3. FLAP
4. Speed
5. EV
6. MP
7. EH
8. Hu
9. TBF
10.FLOAT
11.T1/T2
12.Unit No.
13.Th1
14.Th2
15.Th3
16.Th4
17.Th5
18.Th6
1. Unit No.
Status
2. FAN step
3. COMP
4. EV1
5. SV1
6. Th1
7. Th2
8. Th3
9. Th4
10.Th5
11.Th6
1. Display Warning ON
2. Display Warning OFF
3. Display Error ON
4. Display Error OFF
1. Current Unit No.
2. Transfer Unit No.
 Unit No.: 0 - 15
Value
 Code
 Data
Item 2
Select the Unit No. you want to check.
Fan tap
Swing, fixed
Fan speed (rpm)
Degree that electronic expansion valve is open (pls)
Drain pump ON/OFF
Electric heater ON/OFF
Humidifier ON/OFF
Anti-freezing control ON/OFF
Select the Unit No. you want to check.
Select the Unit No. you want to check.
Fan tap
Compressor power supply frequency (Hz)
Degree that electronic expansion valve is open
(pls)
Solenoid valve ON/OFF
Displays a warning on the screen if an error
occurs.
No warning is displayed.
Displays the error on the screen.
Displays neither errors nor warnings.
A unit No. can be transferred to another.
Select the Unit No. you want to check.
00: Remote controller thermistor (°F)
01: Suction air thermistor (°F)
02: Heat exchanger liquid pipe thermistor (°F)
03: Heat exchanger gas pipe thermistor (°F)
04: Indoor unit address No.
05: Condensing unit address No.
06: Branch Selector unit address No.
07: Zone control address No.
08: Cooling/Heating batch address No.
09: Demand/low-noise address No.
The corresponding data will be displayed, based
on the Unit No. and Code selected.
Remarks
VRV
Suction air thermistor
Heat exchanger liquid pipe thermistor
Heat exchanger gas pipe thermistor
Discharge air thermistor
—
—
VRV
—
—
—
—
—
—
Service Mode
37