Main/Sub Setting When Using 2 Remote Controllers - Daikin VRV-WIII RWEYQ72PTJU Service Manual

Wired Remote Controller
1.3

MAIN/SUB Setting when Using 2 Remote Controllers

Situation
The MAIN/SUB setting is necessary when 1 indoor unit is controlled by 2 remote controllers. When
you use 2 remote controllers (control panel and separate remote controller), set one to MAIN and
the other to SUB.
Setting
The remote controllers are factory setting to MAIN, so you only have to change one remote
controller from MAIN to SUB. To change a remote controller from MAIN to SUB, proceed as
follows:
1.3.1 BRC1E71/72
The designation of the main and sub remote controllers can be swapped. Note that this change
requires turning the power OFF and then ON again.
30
Basic screen
is displayed.
Press and
Press
hold Cancel
Cancel
button for 4
button
seconds or
once.
more.
Select "Switch Main Sub Controller"
and press Menu/OK button.
Service
settings menu
Press Cancel button.
is displayed.
Press Menu/OK
button.
Item 2 is
displayed. displayed.
SiUS30-1301
Select "Main RC"
or "Sub RC" using
the / (Up/Down)
buttons, and then
press Menu/OK
button.
Item 2 is
Remote Controller