Centralized Control Group No. Setting - Daikin RZQ Series FCQ20EVA Service Manual

SiME281501E
1.4

Centralized Control Group No. Setting

1.4.1 BRC1C61/BRC1D61
In order to conduct the centralized remote control using the central remote controller and the unified ON/OFF
controller, Group No. settings should be made by group using the operating remote controller.
Make Group No. settings for centralized remote control using the operating remote controller.
1. While in normal mode, press and hold the "
Setting Mode".
2. Select the Mode No. "00" with the "
3. Use the "
(Group numbers increase in the order of 1-00, 1-01, ... 1-15, 2-00, ... 4-15.)
4. Press the "
5. Press the "
BRC1C61
Group No.
BRC1D61
Group No.
Note:
 For setting Group No. of Heat Reclaim Ventilator and wiring adaptor for other air conditioners, etc., refer to
the installation manual attached.
NOTICE
Enter the Group No. and installation place of the indoor unit into the attached installation table. Be sure to
keep the installation table with the operation manual for maintenance.
Remote Controller
" button to select the Group No. for each group.
" button or the "
" button to return to the Normal Mode.
TEST
4
4
" button for 4 seconds or more to set the system to "Field
TEST
" button.
" button to set the selected group No.
Wired Remote Controller
Mode No.
Field Setting
Mode
Mode No.
Field Setting
Mode
12