Setting Mode 1 - Daikin VRV-WIII RWEYQ72PTJU Service Manual

SiUS30-1301
3.4

Setting Mode 1

Normally, "Setting mode 1" is set. In
case of other status, press MODE
button (BS1) once and set to

"setting mode 1".

<Selection of setting items>
Press the SET button (BS2) and set
LED display to a setting item you
want.
 Regarding setting item No. 1, 5
only the present status is
displayed. For the respective
description, refer to the table 1.
 The cool/heat selection setting can
be changed on setting item 2, 3, 4.
→ After setting, press the RETURN
button (BS3) and decide the
item.
When the RETURN button (BS3) is
pressed, the status becomes the
initial status of "setting mode 1".
Field Setting
Table 1
No. Setting (displaying) Item
Display for error / preparing /
1
test operation
2 C/H selector (individual)
3 C/H selector (master)
4 C/H selector (slave)
5 Demand operation

Setting No. 1, 5 are the present status display only.
Display for error/preparing/test operation
Normal
Error
Preparing/Test operation
Display during demand operation
Normal
During demand operation
Field Setting from Condensing Unit
LED Display Example
H1P H2P H3P
h h k

h h k
h h h
h h h

h h k
h h k
h k k
h l k
h h k
h h k
H3P to H5P LED display changes
depending on setting No. 2, 3, 4.
k h l
: ON : OFF : BLINK
H4P H5P H6P H7P
h h h h
h h h h
k h h h
h k h h
h h h h
h h h h
h h h h
h h h h
h h h h
h h h k
107