Daikin VRV-WIII RWEYQ72PTJU Service Manual page 109

SiUS30-1301
BRC7C Type / BRC7E Type / BRC4C Type
 Group No. setting by wireless remote controller for centralized control
1. When in the normal mode, press "
mode."
2. Set mode No. "00" with "
3. Set the group No. for each group with "
4. Enter the selected group numbers by pressing "
5. Press " " button and return to the normal mode.
Group No. Setting Example
Indoor/Condenser
F1 F2
Caution:
When turning the power supply ON, the unit may often not accept any operation while "88" is displaying after all indications
were displayed once for about 1 minute on the liquid crystal display. This is not an operative fault.
Field Setting
" button for 4 seconds or more, and operation then enters the "field setting
" button.
" "
MODE No.
FIELD SETTING MODE
3
4
GROUP No.
2
1, 5
Condenser/Condenser Indoor/Condenser
F1 F2
F1 F2 P1 P2 F1 F2 P1 P2
RC
Main
1-00
F1 F2 P1 P2 F1 F2 P1 P2
No Remote Controller
1-03
" button (advance/backward).
" button.
Condenser/Condenser
F1 F2 F1 F2
F1 F2 P1 P2
RC RC RC
Sub
1-02
1-01
F1 F2 P1 P2
RC
1-04
Field Setting from Remote Controller
Central Remote
Controller
F1 F2
F1 F2 P1 P2
Group Control by Remote Controller
(Automatic unit address)
F1 F2 P1 P2
101