Perform Initial Configuration - Juniper SRX300 Quick Start Manual

Hide thumbs Also See for SRX300:

Table of Contents

4. Start your asynchronous terminal emulation application (such as Microsoft Windows HyperTerminal) and select the

appropriate COM port to use (for example, COM1).

5. Verify that the serial port settings are set to the default:

Baud rate—9600

Parity—N

Data bits—8

Stop bits—1

Flow control—none

NOTE:

You can also connect to the SRX300 using a mini-USB console port. See the

Perform Initial Configuration

1. Login as the root user and start the CLI. You don't need a password if you're running the factory default.

root@%cli

root>

NOTE:

You can view the factory-default settings with the show configuration operational mode command.

2. Enter configuration mode.

root> configure

[edit]

root#

3. Since you're doing the initial configuration manually, you'll need to remove ZTP from the configuration. This stops the

periodic log messages that report on ZTP status.

Set the root authentication password and commit the change to deactivate ZTP.

[edit]

root# delete chassis auto-image-upgrade

root# delete system phone-home

root# set system root-authentication plain-text-password

New password: password

SRX300 Hardware

Guide.

Table of Contents