Basic Device Configuration; Root Admin Name And Password - Juniper SSG 5 Serial Hardware Installation

Basic Device Configuration

Root Admin Name and Password

NOTE:
This section describes the following basic configuration settings:
Root Admin Name and Password
Date and Time
Bridge Group Interfaces
Administrative Access
Management Services
Hostname and Domain Name
Default Route
Management Interface Address
Backup Untrust Interface Configuration
The root admin user has complete privileges for configuring an SSG 5 device. We
recommend that you change the default root admin name and password (both
netscreen) immediately.
To change the root admin name and password, use the WebUI or CLI as follows:
WebUI
Configuration > Admin > Administrators > Edit (for the Administrator Name):
Enter the following, then click OK:
Administrator Name:
Old Password: netscreen
New Password:
Confirm New Password:
Passwords are not displayed in the WebUI.
CLI
set admin name name
set admin password pswd_str
save

Basic Device Configuration

29