Connecting To A Pptp Vpn; Server Configuration - Mitel 6600 User Manual

7. Click the Advanced tab, select Mitel PBX Tapi Service Provider, and click Configure.
8. Scroll down in the current IP address until you see the selected address (marked by a
red arrow), and verify that it the VPN's network IP address (if it's not, go back to step 1).
9. Click OK (do not click Cancel or the x). This communicates the VPN's network IP
address to Your Assistant.
10. You can now start Your Assistant.

Connecting to a PPTP VPN

This section shows the procedure to use Your Assistant with a Point-to-Point Tunneling
Protocol (PPTP) VPN, as tested with the Mitel Networks 6000 Managed Applications Server.

Server Configuration

The following settings must be configured on the VPN server (verify with your system
administrator):
• PPTP enabled.
• External static gateway IP address assigned.
• Server gateway mode on.
Connecting to a PPTP VPN
1. Connect to your ISP, and verify that the connection is established (access a public site
on the Internet).
2. If this is the first time you are connecting, you must create a connection profile (see
"Creating a PPTP Connection Profile" on page 60).
3. Connect to the PPTP VPN using your connection profile.
Revision B
Appendix B—Using VPNs
59