Getting Started
This section shows you how to set up and start Your Assistant, and is organized as follows:
•
Installing Your Assistant (below)
•
Starting and Closing Your Assistant (page 13)
•
Setting up Your Assistant (page 15)
•
Exploring Your Assistant (page 18)
Installing Your Assistant
1. Double-click the Your Assistant installer file provided by your system administrator, and
follow the instructions. The installer automatically puts a shortcut to the application on
your desktop.
-
If the installer asks you whether to repair or remove Your Assistant, select Repair.
2. Open Your Assistant (the installer puts a shortcut on your desktop).
3. Make a call to verify that Your Assistant is working properly. If you have any problems,
see your system administrator.
Note: When re-installing or upgrading Your Assistant, all your preferences and
contacts are preserved.
Starting and Closing Your Assistant
Starting Your Assistant
1. Start the application (double-click icon on desktop, or select Start/Programs/
Your Assistant).
2. If you are using Your Assistant Pro, you are asked to select the device you want to use
(desk phone or softphone). Select the desired device using the pull-down menu, and
click OK.
Note: If you do not want to get this message every time you start Your Assistant,
select the Do not ask me at next startup box (see "Changing the Device for Your
Assistant Pro" on page 41 to change your device or clear this option).
Revision B
Getting Started
13