Table of Contents
Advertisement
GUI – Installation
Image 8–42 Bow distortion
Definition of angle and linearity (length) in the bow warp procedure
Image 8–43
Symmetric bow correction
1.
In the main menu, select Installation → Warp → Bow.
Image 8–44 Warp menu, Bow
The bow menu is displayed.
2.
To enable bow correction, make sure the Bow slider is enabled (visible by the blue highlight).
3.
To perform a symmetric adjustment , make sure the Symmetric slider is set to On (visible by the blue
highlight).
96
R5906112 /15
UDX
Advertisement
Table of Contents
