Getting To Know The Projector - Barco UDX User Manual

Getting started

2.1 Getting to know the projector

Orientation convention
This manual refers to the left side of the projector as the side at your left hand when standing behind the
projector and looking at the projection screen in front of the projector.
Image 2–1
T Top
L Left
F Front
Projector component location
1
2
Image 2–2
1 Power input socket
2 Power On/Off switch
3 Input & Communication module
4 IR receiver projector right side
5 Dust filter front air inlet
For detailed info about the Input & Communication module see chapter
Projector airflow
The projector has 4 air inlet channels and 2 air outlets. The air outlets are located at the rear of the projector.
The air inlets are located at the top, bottom and right side of the projector.
24 R5906112 /15 UDX
9
3 4 5
R Right
B Back
6 7 8
6 Auxiliary connector (for external shutter, DMX, ...)
7 IR receiver projector front side
8 Distance meter (optional)
9 Dust filter top air inlet
"Input & Communication", page 39.