Table of Contents
Advertisement
Image 10–68 Installation menu, Cooling
The Cooling menu is displayed.
Image 10–69 Example of the cooling menu
2.
In the Cooling menu, select the desired cooling option.
Note: After changing the settings, it can take up to 1 minute for the changed settings to take effect.
10.21 Capture mode
Why use capture mode?
Various technical features are used inside the projector to display the best possible image on the projected
surface. However, in expositions and setups where visitors are expected to film or take pictures of the
projected surface, some of these technical features may have side-effects on the captured footage, such as
solarization.
Enabling the Capture mode feature disables some of the technical features of the projector that are known to
cause solarization and gives the visiting audience an experience they can "capture" and post on social media
without worries.
How to enable Capture mode
1.
In the main menu, navigate to Settings → System .
2.
In the Lens menu, click Capture mode to toggle between On and Off.
Image 10–70 System menu, Capture mode disabled
GUI – System Settings
Image 10–71 System menu, Capture mode enabled
R5906112 /15
UDX
155
Advertisement
Table of Contents
