Table of Contents
Advertisement
GUI – System Settings
10.6 GSM configuration
Only possible when a GSM module with SIM card is installed in the projector.
When to use the GSM menu
The GSM menu by itself does not have any functionality. The main purpose of this menu is to read out the
necessary data from the SIM card in the GSM module.
You may require this information when using specific connectivity functions (e. g. configuring the Projector
Management Suite in a mobile–only setup).
About the SIM card PIN code
To configure the projector software with the installed SIM card for the first time, a correct PIN code (4 digits)
must be entered.
As the PIN code cannot be checked with the one on the SIM card, ensure to enter the correct PIN
code.
When your SIM card is blocked, you have to remove the SIM card from the GSM module and to
insert the SIM card in a mobile phone so that you can enter the PUK code to unblock the SIM card.
How to activate
1.
In the main menu, select Settings → Communication → GSM.
Image 10–32 Communication menu, GSM
At first use, the GSM pin code input menu is displayed. If a correct pin code has been entered in the past,
it will not be necessary to enter the pin code again and you can skip the next step.
2.
Enter the 4 digits of the PIN code and confirm.
Image 10–33 Example of the GSM menu once the pin code has been applied
138
R5906112 /15
UDX
Advertisement
Table of Contents
