Error Indications - QMS DeskLaser 1600 User Manual

Problem
Pages have toner stains or
smudging
Toner insufficiently adheres
to or easily comes off paper
when you are printing thick
or special paper.
Vertical lines appear in solid
black printing, stains appear
in the back of a page, or
paper is wrinkled or curled.
Error
Errors refer to a problem or condition which requires you to take action.
Indications
The printer shows errors by using the ERROR indicator and the message
display of the control panel. The following table lists the error
indications, explains causes, and suggests solutions.
Message
BD CYCLE ERROR
COMM.ERROR
QMS DeskLaser 1600 User Manual
Solutions
If this problem occurs after a paper
jam, print several pages.
Clean the paper path.
Clean the paper guide before the
corona wire.
Clean the corona wire.
Replace the cleaner pad.
If the fuser unit is damaged, contact
your dealer.
Turn the thick paper mode on
using the control panel .
Check if the thick paper mode is
on by using the control panel; if
the mode is on, turn it off.
Causes and solutions
Cause: Malfunction in the laser unit
Solution: If the error recurs, consult your
dealer for service.
Cause: Communication error
Solution: Press the button and
CONT.
select the correct settings of the serial
interface using the control panel setup
mode.
5-13