Table of Contents
Advertisement
To remove the print unit, follow these steps:
Notice:
If you want to re-use the print unit, do not touch or scratch the green
drum surface after removing the print unit.
QMS DeskLaser 1600 User Manual
Print unit
Green drum
1. Open the upper door.
2. Raise the green handles of
the print unit.
3. Remove the print unit. Pull
the green handles at a 45°
angle toward the front of the
printer. This will disengage
the print unit, allowing easy
removal.
When the print unit begins to
move, gently lift it up and
out.
If you want to re-use the print
unit, be careful not to scratch
the green surface of the drum
against the printer or its parts.
To avoid spilling toner, be
sure to keep the print unit
upright and keep the toner
cartridge mounted on the
print unit.
4-9
Advertisement
Table of Contents
