If Something Goes Wrong - QMS DeskLaser 1600 User Manual

If Something Goes Wrong

This section briefly discusses the most common problems you might
encounter.
Problem
No response by printer
No printout; DATA
indicator on
Unreadable printout
QMS DeskLaser 1600 User Manual
Remedy
Ensure that:
• The printer is turned on and online. The
ONLINE indicator should be lit.
• The cable from the computer to the printer
is properly connected at both ends.
• Your software program has sent the print
data to the printer. Many programs have a
printer control function that shows print
The printer has received data from the
computer but has not printed the page. To
print the page, put the printer offline by
pressing briefly then press
READY
.
FORM FEED
Possible causes and solutions are:
• A wrong printer driver is selected. Select
the correct printer driver as the document
printer.
• The document contains unknown printer
commands. Remove any setup strings or
embedded commands.
1-23