Table of Contents
Advertisement
you can only print about 20 more pages. Under the toner empty
condition (no toner), the printer will not work.
Important:
Whenever you replace the toner cartridge, clean the corona wire and the
precharger wire to prevent a degradation in print quality.
You can continue to print after the toner low status if the print quality is
still satisfactory. However, you must at least prepare a new toner
cartridge.
To replace the toner bottle, follow these steps:
Notice:
Be careful not to allow dust or foreign matter into the toner hopper.
QMS DeskLaser 1600 User Manual
1. Open the upper door.
2. Tap the toner cartridge. Tap
the toner case to drop any
remaining toner from the
toner cartridge into print
unit. This avoids the
remaining toner from being
spilt inside the printer during
replacement.
3. Unlock and remove the old
toner cartridge. Pull the top
of the toner cartridge toward
you to swing the cartridge
from the upright position to
the removable position.
Gently remove the cartridge.
If necessary, clean toner
around the toner hopper
entry of the print unit.
4-3
Advertisement
Table of Contents
