Table of Contents
Advertisement
QMS DeskLaser 1600 User Manual
Selecting Paper Tray, MFF, or Manual Paper Feed
(
)
TRAY SELECT
Pressing
puts the printer in tray select mode which allows
TRAY SELECT
you to select paper sources to be used. The paper sources are tray 1, tray 2
(if installed), MFF (if installed), and manual feed slot. When a paper
source runs out of paper, the printer switches for another one. When the
manual feed slot is selected, other paper sources are made invalid.
To select a paper source, follow these steps:
1. Make sure that the message display indicates
ONLINE and DATA indicators off.
2. Press the
button briefly.
TRAY SELECT
The message changes to
TRAY TRAY1*
tray 1 is selected.
3. Select or deselect a paper source.
This step is valid when tray 2 or the MFF is installed. Pressing the
button in this condition makes the asterisk disappear. Tray 1
ENTER
is deselected. Pressing the
reappear. Tray 1 is selected.
4. Select or deselect other paper sources.
Press the
or
buttons briefly to display another paper source.
+
-
Use the
button in the same way as described above.
ENTER
5. Save the selections.
Press
button to save the new settings and return to the
READY
ready state.
TRAY SELECT
READY
TRAY
or
+
-
TRAY
TRAY
READY
. The asterisk means that
button again makes the asterisk
ENTER
TRAY1*
MANUALFEED OFF*
TRAY2
MANUALFEED ON
MFF
with the
2-8
Advertisement
Table of Contents
