Table of Contents
Advertisement
QMS DeskLaser 1600 User Manual
To remove the multi-function feeder, follow these steps:
Notice:
Be sure that the printer is turned off before installing or removing
the multi-function feeder.
3. Set the physical paper size
of the MFF. Use the MFF
paper size menu to select
the size of paper loaded in
the MFF. See the early
section in this chapter.
1. Disconnect the feeder cable
and push the two levers at
the bottom of the feeder
upwards to unlock the two
hooks.
2. Then, lift the feeder aslant
toward you to remove it.
2-25
Advertisement
Table of Contents
