QMS DeskLaser 1600 User Manual
Setting Up the Rear Stacker
This printer has a rear stacker that allows you to eject sheets straight out
the back to minimize curl. Use the rear stacker to print envelopes,
overhead transparencies, and labels. For the rear stacker of an optional
duplex unit, refer to its manual.
To use the rear stacker, follow these steps:
1. Open the rear stacker. Pull
the projections at the top of
the stacker.
2. Remove the paper support
from inside the stacker.
Paper support
3. Set the paper support in
position. Insert the two ends
of the paper support into the
mounting grooves of the rear
stacker.
2-27