Table of Contents
Advertisement
QMS DeskLaser 1600 User Manual
6. Install the print unit. Grasp
the print unit by its green
handles with the green drum
surface facing you.
First, slide straight down the
ends of the drum shaft along
the grooves on the sides of the
printer. Then, slide the print
unit at a 45 degree angle
towards the back of the
printer.
Press down gently on the left
and right portions marked
PUSH until the print unit
snaps into position.
7. Close the upper door. Before
closing the door, make sure
the print unit is seated
properly. Press down the door
until it clicks into place.
5-9
Advertisement
Table of Contents
