Table of Contents
Advertisement
Resetting the Print Unit Counter
Perform this operation whenever you have replaced the print unit, or the
printer continues displaying the warning message
To reset the print unit counter, follow these steps:
QMS DeskLaser 1600 User Manual
READY
REPLACE PARTS
POWER
ONLINE
DATA
ERROR
SETUP MENU
PAGE FORMAT MENU
POWER
ONLINE
DATA
ERROR
SETUP MENU
CLEAR WARNING
REPLACE PARTS
1. Make sure the printer is
offline. If necessary, press the
button to put the
READY
printer offline. The ONLINE
indicator is off with the
massage
REPLACE PARTS
displayed.
2. Press the
button to
MENU
put the printer in menu
mode.
The message changes to
SETUP MENU PAGE
.
FORMAT MENU
3. Press the
button
MENU
repeatedly until the lower
message changes to
CLEAR
.
WARNING
.
4-15
Advertisement
Table of Contents
