Table of Contents
Advertisement
Notice:
Leaving the two levers raised causes damage to the levers when the print
unit is installed and pressed down.
Caution:
!
Do not touch the heat roller. This hot area may burn your hand. See the
label attached to the upper door.
QMS DeskLaser 1600 User Manual
4a. Pull out the tray and raise
the left and right levers of
the feed roller.
Remove the sheet. Pull the
jammed sheet gently not so as
to remain pieces of paper in
the printer.
After removing the sheet,
return the two levers to their
original positions (pull the
levers down toward you).
4b.Remove the sheet.
5-3
Advertisement
Table of Contents
