WAITING ON
INPUT END JOB?
WARMING UP
PostScript Error with Error Handler Enabled
If you receive a PostScript error when printing a file that
previously printed correctly on another PostScript printer,
check the "Other Common Printer Problems" section that
appears later in this chapter for a solution. If no solution is
found, then call your QMS vendor for additional error
information.
If you receive a PostScript error when printing a new file
from a new application, check the "Other Common Printer
Problems" section that appears later in this chapter for a
solution. If no solution is found, see the PostScript
Language Reference Manual (Adobe Systems, Inc.,
Readin g, MA : A ddison- Wesley, 1990, I SBN
0-201-18127-4), or call your QMS vendor for additional
error information.
T r o u b l e s h o o t i n g
until the print job is finished. Wait until the
print job is finished and the printer goes idle.
Indicates that the compiler is waiting on
incoming data for the first job in the queue.
The job may not have an end-of-job indica-
tor and therefore cannot end. You may want
either to cancel or to end the print job. The
message clears if more input arrives from
the port or if you press the Cancel key. No
other jobs can be printed until this job has
ended.
Indicates that the printer is warming up.
Wait until the IDLE message displays be-
fore printing.
Chapter 9
9 - 5