Connecting The Printer To Your Computer; About Interfacing - QMS DeskLaser 1600 User Manual

Caution:
!
For your safety, use only a properly grounded outlet. To avoid possible
electromagnetic interference or power supply problems, do not use an
extension cord.
This section explains how to connect the printer to your computer via
Connecting
the parallel interface.
the Printer to
Your
Computer
Notice:
The following restrictions apply to interface cables:
• To comply with regulations for radio frequency emissions, use only
• The length of the parallel interface cable must be 3 meters (10 feet) or

About Interfacing

You can connect the printer to your computer using a standard parallel
interface. Many computers have a parallel interface port. However, if
your computer does not have the parallel interface port, or for printers
used in a network, the following optional interfaces are available.
QMS DeskLaser 1600 User Manual
shielded cable for computer-to-printer communications.
less.
3. Plug the male end into a
wall outlet.
1-17