Table of Contents
Advertisement
Notice:
Do not touch any connector contacts to avoid possible electrostatic
damage to the printer.
Important:
When installing two RAM cards, first install the lower one, and then the
upper one.
Turn the power on. If necessary, change buffer memory assignment (page
protect or jam recovery) using the control panel.
QMS DeskLaser 1600P User Manual
3. Install the RAM card. Push
its top edge downwards so
that holes of the card align
with locating pins of the
connector and the card is
secured by retaining clips.
To remove an unsealed RAM
card push out the retaining
clips. When, the card slants
outwards pull the card to
remove.
3-3
Advertisement
Table of Contents
