Feeding Paper Manually - QMS DeskLaser 1600 User Manual

Feeding Paper Manually

The multi-function of this printer has a slot that allows you to feed sheets
manually one by one. Use the manual feed slot to print a document on a
different type of paper without unloading your regular paper from the
paper tray. You also use manual feed for printing envelopes, overhead
transparencies, and labels.
You can also use the manual feed slot built in the printer. The procedure
is the same.
To use the manual feed slot, first select
select mode of the control panel. Next, start your software program to
print a file. Then follow these steps:
Release the paper once it begins to feed automatically. If your file has
additional pages, the printer prompts you for another sheet.
QMS DeskLaser 1600 User Manual
using the tray
MANUALFEED ON
1. Adjust the paper guides.
Position the left and right
upper guides to the width of
the sheet. (Lower two guides
are for paper stack.)
2. Place the sheet with print
side face up. When the
printer is ready to print, it
displays the message
Insert
to prompt you to prepare
size
a sheet of paper. Insert the
sheet until it is stopped by the
feed rollers. Insufficient
insertion prevents paper from
being fed or causes skewed
feeding.
2-26