Table of Contents
Advertisement
Selecting an
Emulation
QMS DeskLaser 1600 User Manual
This printer has two emulations (PCL and PS) as a standard feature.
You can use these emulations to connect your printer to different
computers. PCL6 emulates HP LaserJet 5 printers and PS emulates
PostScript Level 2 compatible printers.
With default settings, the printer automatically selects the active
emulation. To specify an emulation, select the emulation using the
control panel. Use the Personality menu of the Config menu as
shown below.
READY
POWER
ONLINE
ERROR
DATA
SETUP MENU
CONFIG MENU
POWER
ONLINE
DATA
ERROR
PERSONALITY
AUTO*
The selected emulation is selected (an asterisk is followed). Once you
change the emulation, the other menus automatically change to
reflect the options and functions of the new emulation.
1. Enter setup mode. Press the
button to put the
READY
printer offline (the
ONLINE indicator turns
off). Then, press the
MENU
button briefly six times.
The message display
indicates
SETUP MENU
.
CONFIG MENU
2. Select the Personality
menu. Press the
ENTER
button briefly. The message
display indicates
.
PERSONALITY AUTO*
3. Select emulation. Press the
button briefly. The
+
option
changes to
AUTO
,
, then back to
PCL
PS
. Press the
AUTO
ENTER
button when the desired
option is displayed. Press
the
button to return
READY
to the ready state.
1-20
Advertisement
Table of Contents
