Table of Contents
Advertisement
Menu Items
QMS DeskLaser 1600 User Manual
*10 If the total capacity of memory is 3M to 9M bytes with banding
mode off, the resolution is automatically set to 300 dpi. When
intending to print at 600 dpi, select "banding mode on" or
install additional memory cards of 6M bytes or more.
*11 This is essential for sharing the printer among multiple
computers.
Notice:
The QMS DeskLaser 1600P/Net and 1600P/XNet are equipped
with an Ethernet interface. Installation instructions are provided in
the QMS DeskNet Interface Manual.
The following explains each item of the menu mode.
Page format menu
Copies
The number of copies the printer prints from
each page
Paper/Envelope
A paper size or envelope size to be used by the
printer
Orientation
A printing direction
Form lines
The number of lines printed per page
Page protect
Whether a block of printer memory is reserved
exclusively for text and graphics data,
especially for printing dense text or complex
graphics, to prevent memory overflow errors.
However, it reduces the amount of printer
memory available for downloadable fonts.
Duplex mode
Two-sided printing mode
Binding
Where an extra area for fastening pages is
located, short or long edge of a page
Quality menu
Smoothing
Whether the edge smoothness technology is
applied.
Resolution
The number of dots printed per inch
Economy mode
Toner saving mode
Thick paper
Mode for printing thick paper. Be sure to turn
this off whenever you are using paper of
ordinary thickness.
2-14
Advertisement
Table of Contents
