Epson WF-M21000 Series User Manual page 391

Using Optional Items
> > ...
Ethernet Board (10/100/1000 Base-T, Ethernet) Settings when Using an Additional Ne
❏ Fax to Email
❏ Fax to Folder
Follow the steps below to select the network to use these scan and fax functions.
1. Select Settings on the home screen.
2. Select General Settings > Network Settings > Network Transmission Route.
3. Select Standard or Additional for the network to use the scan and fax functions.
Selecting a Network that has an LDAP Server (When Using an Additional
Network)
You can use the LDAP server on either the standard or additional network.
Follow the steps below to select the network that has the LDAP server you want to use.
1. Select Settings on the home screen.
2. Select General Settings > Network Settings > LDAP Server.
3. Select Standard or Additional for the network that has the LDAP server.
Receiving Email Notifications When Events Occur (When Using an Additional
Network)
About Email Notifications (When Using an Additional Network)
This is the notification function that, when events such as printing stop and printer error occur, send the email to
the specified address.
You can register up to five destinations and set the notification settings for each destination.
To use this function, you need to set up the mail server before setting up notifications. Set up the email server on
the network (standard or additional) to which you want to send the email.
Related Information
"Configuring a Mail Server" on page 489
&
Configuring Email Notification (When Using an Additional Network)
Configure email notification by using Web Config from a computer on the standard network.
1. Enter the printer's IP address for the standard network into a browser to access Web Config.
2. Select the Device Management tab > Email Notification.
391