Table of Contents
Advertisement
Adding or Replacing the Computer or Devices
Restore Default Settings
Restore all Wi-Fi Direct (simple AP) settings to their defaults.
The Wi-Fi Direct (simple AP) connection information of the smart device saved to the printer is deleted.
Note:
You can also set up from the Network tab > Wi-Fi Direct on Web Config for the following settings.
❏ Enabling or disabling Wi-Fi Direct (simple AP)
❏ Changing network name (SSID)
❏ Changing password
❏ Changing the frequency range
Depending on the region, this setting may not be displayed.
❏ Restoring the Wi-Fi Direct (simple AP) settings
Checking the Network Connection Status
You can check the network connection status in the following way.
Related Information
"Checking the Network Connection Status from the Control Panel" on page 321
&
"Printing a Network Connection Report" on page 322
&
Checking the Network Connection Status from the Control Panel
You can check the network connection status using the network icon or the network information on the printer's
control panel.
Checking the Network Connection Status using the Network Icon
You can check the network connection status and strength of the radio wave using the network icon on the
printer's home screen.
Related Information
"Guide to the Network Icon" on page 29
&
>
Checking the Network Connection Status
321
>
...
Chec
Advertisement
Table of Contents
