Table of Contents
Advertisement
Solving Problems
❏ If paper jams occur frequently, try using newly opened papers.
❏ Try disabling Print Speed Priority. On the home screen, tap Settings > General Settings > Printer Settings >
Print Speed Priority, and then disable the setting.
❏ When you punch holes using the hole punch unit installed in the staple finisher or the booklet finisher, adjust
the data so that it is not printed at the punch position. Alternatively, set the binding margin so that it is not
printed at the punch position. If you punch on the printed area, it may cause punch failure or a paper jam.
"Punching Each Set of Copies from a Computer" on page 342
"Copying and Stapling or Punching Holes" on page 347
It is Time to Replace the Ink Cartridges
Ink Cartridge Handling Precautions
Read the following instructions before replacing ink cartridges.
Handling Precautions
❏ Store ink cartridges at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink cartridge before the date printed on the package.
❏ For best results, store ink cartridge packages with their bottom down.
❏ After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at
least 12 hours before using it.
❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.
❏ Install all ink cartridges; otherwise you cannot print.
❏ Do not turn off the printer during ink charging. If the ink charging is incomplete, you may not be able to print.
❏ Do not leave the printer with the ink cartridge removed or do not turn off the printer during cartridge
replacement. Otherwise, ink remaining in the print head nozzles will dry out and you may not be able to print.
❏ If you need to remove an ink cartridge temporarily, make sure you protect the ink supply area from dirt and
dust. Store the ink cartridge in the same environment as the printer, with the ink supply port facing sideways.
Because the ink supply port is equipped with a valve designed to contain the release of excess ink, there is no
need to supply your own covers or plugs.
❏ Removed ink cartridges may have ink around the ink supply port, so be careful not to get any ink on the
surrounding area when removing the cartridges.
>
It is Time to Replace the Ink Cartridges
>
Ink Cartridge Handling Precautions
286
Advertisement
Table of Contents
