Epson WF-M21000 Series User Manual page 310

Adding or Replacing the Computer or Devices
After connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
"Making Wi-Fi Settings by Entering the SSID and Password" on page 310
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 311
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 311
&
Making Wi-Fi Settings by Entering the SSID and Password
You can set up a Wi-Fi network by entering the information necessary to connect to a wireless router from the
printer's control panel. To set up using this method, you need the SSID and password for a wireless router.
Note:
If you are using an wireless router with its default settings, the SSID and password are on the label. If you do not know the
SSID and password, contact the person who set up the wireless router, or see the documentation provided with the wireless
router.
1. Tap
on the home screen.
2. Tap Router.
3. Tap Start Setup.
4. Tap Wi-Fi Setup.
If you have made Ethernet settings, check the message and then tap Yes.
5. Tap Wi-Fi Setup Wizard.
6. Follow the on-screen instructions to select the SSID, enter the password for the wireless router, and start setup.
If you want to check the network connection status for the printer after setup is complete, see the related
information link below for details.
Note:
❏ If you do not know the SSID, check if it is written on the label of the wireless router. If you are using the wireless
router with its default settings, use the SSID written on the label. If you cannot find any information, see the
documentation provided with the wireless router.
❏ The password is case-sensitive.
❏ If you do not know the password, check if the information is written on the label of the wireless router. On the label,
the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router
with its default settings, use the password written on the label.
>
Re-setting the Network Connection
310
> ...
Making Wi-