Epson WF-M21000 Series User Manual page 366

Using Optional Items
1. Place the originals.
"Placing Originals" on page 41
2. Select Copy on the home screen.
3. Select the Basic Settings tab, and then select Finishing.
4. Select Shift Sort in Eject Paper, and then select OK.
5. Tap
x
.
Copying and Stapling or Punching Holes
You can copy originals and staple them or add punch holes.
Important:
c
Adjust the data so that it is not printed at the punch position. If you punch on the printed area, it may cause punch
failure or a paper jam.
1. Place the originals.
"Placing Originals" on page 41
2. Select Copy on the home screen.
Note:
If there is an image at the punch position, secure a binding width of 18 mm or more before copying. You can set the
binding margin from Binding Margin on the Advanced tab.
For details on how to create a binding, see "Related Information" below.
3. Select the Basic Settings tab, and then select Finishing.
4. Select the staple position in the Staple option or the punch holes position in the Punch option, and then select
OK.
5. Tap
x
.
> >
Booklet Finisher Using the Booklet Finisher
366