Epson WF-M21000 Series User Manual page 380

Using Optional Items
The functions for each item are the same as for standard faxing. See "Related Information" below for
details on each item.
Transmission Setting By Line:
G3-1:
Select an option for standard line G3-1 according to how it will be used (sending only,
receiving only, or sending and receiving). When any optional fax board is not installed
(standard faxing only), this corresponds to Sending and Receiving.
G3-2:
Select an option for extension line G3-2 according to how it will be used (sending only,
receiving only, or sending and receiving).
G3-3:
Select an option for extension line G3-3 according to how it will be used (sending only,
receiving only, or sending and receiving).
Related Information
"Basic Settings" on page 424
&
Receive Settings
Save/Forward Settings
Conditional Save/Forward:
You can find the menu on the printer's control panel below: Settings > General Settings > Fax
Settings > Receive Settings > Save/Forward Settings > Conditional Save/Forward.
Note:
On the Web Config screen, you can find the menu below.
Fax tab > Save/Forward Settings > Conditional Save/Forward
You can set saving and/or forwarding destinations to the Inbox, confidential boxes, an external
memory device, email addresses, shared folders, and another fax machine.
To switch between enabling or disabling the conditions, tap anywhere on the set item except
for
Condition(s)
>
Fax Board (Super G3/G3 Multi Fax Board)
.
Select conditions and then make settings.
Received Line Match:
When the line port matches, the received fax is saved and forwarded.
You can also select the following conditions (the same as for standard faxing). See
"Related Information" below for more details.
❏ Sender Fax Number match
❏ Subaddress(SUB) perfect match
>
Fax Settings Menu (When Optional Fax Boar
380
...