Table of Contents
Advertisement
Solving Problems
There is dust or dirt on the ADF or originals.
Solutions
Clean the ADF, and remove any dust or dirt that adheres to the originals.
"Cleaning the ADF" on page 210
&
Blurry Scans, Vertical Banding, or Misalignment
The originals are folded or wrinkled.
Solutions
❏ When using the ADF
Do not place the originals on in ADF. Place the originals on the scanner glass instead.
❏ When using the scanner glass
Flatten out the folds and wrinkles in the originals as much as possible. When placing originals, try
placing a piece of card and so on over the document so that it does not lift up, and remains in close
contact with the surface.
Offset Appears in the Background of Scanned Images
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
When scanning from the scanner glass, place black paper or a desk pad over the original.
"Placing Originals" on page 41
&
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
299
Scanned Image Problems
Advertisement
Table of Contents
