Table of Contents
Advertisement
Using Optional Items
Related Information
"Setting the High Capacity Tray in the Printer Driver" on page 335
&
Printer Settings When Using the Booklet Finsher
You need to make settings on the printer to use the Booklet Finisher.
❏ When copying
Tap Settings > General Settings > Printer Settings > Output: Copy, and then select Finisher tray.
❏ When faxing
Tap Settings > General Settings > Printer Settings > Output: Fax, and then select Output tray or Finisher
tray.
❏ When printing from a computer, memory device, and so on.
Tap Settings > General Settings > Printer Settings > Output: Other, and then select Finisher tray.
When printing from a computer, you can specify whether or not to use the finisher unit from the Output Tray
menu on the printer driver.
Important:
c
When using the finisher tray, do not remove your printouts while the print job is still in progress. The print position
may be misaligned and the staple position may move from its original position.
Using the Booklet Finisher
Stacking Each Set of Copies by Sorting from a Computer
You can sort the printouts by stacking each set of copies by alternately rotating 90 degrees. If you install the
optional booklet finisher, you can also sort by offsetting each set of copies.
Rotate Sort:
Stacks the printouts alternately in the portrait orientation and the landscape orientation when printing
multiple copies. This feature uses two paper sources. Load paper in the portrait orientation in the paper
source, load paper in the landscape orientation in the other paper source, and then select Auto Select
as the Paper Source setting. Select Auto Select or Face Down Tray as theOutput Tray setting. The
printouts are stacked in the Face Down Tray.
>
>
Booklet Finisher
Using the Booklet Finisher
355
Advertisement
Table of Contents
